Delta

REFERENCE 002

Explore available lengths, finishes and crank geometry. Match the interface and Q-factor to your complete assembly using the technical drawing.

Material: Aluminium
Weight: 245 g
Length (mm): 150 . 152 . 155 . 160 · 165 . 170 . 172,5 . 175

Weight is for the catalogue configuration. See measurement notes below.

Environmental Product DeclarationIndependently verified by SGS ICS Italia

Every specification.
Considered.

Technical data from the 2026 Miranda catalogue. Measurement conditions and available configurations are shown with the original drawing.

Delta specifications
Material	Aluminium
Length (mm)	150 . 152 . 155 . 160 · 165 . 170 . 172,5 . 175
Weight (g)	245
Finishes	Standard · Polished · Diamant · Double Diamant · Pearl · Plus · Inline · Inline Plus · Graphic · HD

crank (ISIS 170/Q:16) without bolt

Made to fit.

Choose dimensions as part of a complete assembly. Final compatibility depends on the frame, drivetrain and selected components.

Crank Q-factor geometry

Crank Q-factor	A	B	C	D
Q:0	0 mm	27,1 mm	10,5 mm	14,1 mm
Q:4	4 mm	27,1 mm	10,5 mm	18,1 mm
Q:8	8,1 mm	27,1 mm	10,5 mm	22,2 mm
Q:8-FB	8,1 mm	30,1 mm	13,5 mm	25,2 mm
Q:16	16,1 mm	27,1 mm	10,5 mm	30,2 mm
55Q:16	16,1 mm	32,6 mm	16 mm	35,7 mm
Q:16-UC	16,1 mm	38,9 mm	22,3 mm	42 mm
Q:19	19,1 mm	27,1 mm	10,5 mm	33,2 mm
Q:21-FB	21,1 mm	30,1 mm	13,5 mm	38,2 mm
55Q:21	21,1 mm	32,6 mm	16 mm	40,7 mm
Q:29,5-UC	29,5 mm	38,9 mm	22,3 mm	55,5 mm
55Q:29,5	29,6 mm	32,6 mm	16 mm	49,2 mm
Q:35	35,1 mm	27,1 mm	10,5 mm	49,2 mm
55Q:35	35,1 mm	32,6 mm	16 mm	54,7 mm
Q:38	38,1 mm	27,1 mm	10,5 mm	52,2 mm

Environmental Product Declaration

Environmental data.
Independently verified.

The Delta crank family is represented in Miranda’s multi-product Environmental Product Declaration for forged aluminium cranks. The declaration and data were independently verified by SGS ICS Italia.

Conservative, worst-case results across the included products. Explore the full declaration for its product scope, reference configurations and environmental indicators.

Download EPD · PDF View public registration

Third-party verification: SGS ICS Italia
Declaration: EPD-IES-0027768:001
Study scope: Cradle-to-gate
Standard / stated validity: ISO 14025:2006
27 January 2031

International EPD System traceability logotype and QR code for Miranda EPD-IES-0027768:001

International EPD® System
Programme identification
and declaration traceability

Estimated impact · one crank arm

1.91 kg CO₂e per crank arm

Based on one 245 g catalogue reference crank arm.

Mass-based estimate using the EPD’s conservative factor. Arm weight depends on the selected configuration.

How this estimate is calculated

7.78 kg CO₂e/kg × 0.245 kg = 1.91 kg CO₂e per crank arm.

The displayed estimate is for one crank arm at the catalogue’s reference mass. This is an illustrative conversion of the multi-product EPD’s conservative GWP-total factor, rather than an independently verified result for this individual variant. Left/right geometry, length, interface and finish can change the actual arm weight.

Catalogue weight note: crank (ISIS 170/Q:16) without bolt.

The EPD declares 1 kg of forged aluminium cranks with the referenced packaging included in the assessment. It reports the highest result for each indicator across its included products; different indicators can therefore represent different products. Primary data refer to 2024.

The study is cradle-to-gate. Customer distribution, use and end-of-life stages are outside this boundary. The declaration concerns forged aluminium cranks; it does not establish the footprint of a complete crankset with chainrings, spindle, spider and additional hardware.

Published families: Delta, Kapa/Kappa, Sigma, Epsilon, Classic, PSI, Helius, Virage, Kies and Mythos (Mithos in the catalogue). See the declaration’s product list and reference configurations, and contact Miranda to confirm applicability for your specification.

Ask about environmental data