Carbon Crank↗
Carbon fibre141 g
+
Miranda / Cranks2026 collection
Cranks / Made in Portugal
Epsilon
REFERENCE 005
Explore available lengths, finishes and crank geometry. Match the interface and Q-factor to your complete assembly using the technical drawing.
- Material
- Aluminium
- Weight
- 201 g
- Length (mm)
- 165 . 170 .175
Weight is for the catalogue configuration. See measurement notes below.
Environmental Product DeclarationIndependently verified by SGS ICS ItaliaEvery specification.
Considered.
Technical data from the 2026 Miranda catalogue. Measurement conditions and available configurations are shown with the original drawing.
| Material | Aluminium |
|---|---|
| Length (mm) | 165 . 170 .175 |
| Weight (g) | 201 |
| Finishes | Standard |
- crank (ISIS 165/Q:8) without bolt
Made to fit.
Choose dimensions as part of a complete assembly. Final compatibility depends on the frame, drivetrain and selected components.
Crank Q-factor geometry
| Crank Q-factor | A | B | C | D |
|---|---|---|---|---|
| Q:0 | 0 mm | 27,1 mm | 10,5 mm | 14,1 mm |
| Q:4 | 4 mm | 27,1 mm | 10,5 mm | 18,1 mm |
| Q:8 | 8,1 mm | 27,1 mm | 10,5 mm | 22,2 mm |
| 55Q:8 | 8 mm | 32,7 mm | 12,5 mm | 27,7 mm |
| Q:16 | 16 mm | 27,2 mm | 10,5 mm | 30,2 mm |
| 55Q:21 | 21,1 mm | 32,6 mm | 16 mm | 40,7 mm |
| Q:35 | 35,1 mm | 27,1 mm | 10,5 mm | 49,2 mm |
Environmental Product Declaration
Environmental data.
Independently verified.
The Epsilon crank family is represented in Miranda’s multi-product Environmental Product Declaration for forged aluminium cranks. The declaration and data were independently verified by SGS ICS Italia.
Explore the full declaration for the covered products, reference configurations and independently verified environmental indicators.
- Third-party verification
- SGS ICS Italia
- Declaration
- EPD-IES-0027768:001
- Study scope
- Cradle-to-gate
- Standard / valid until
- ISO 14025:2006
27 January 2031
International EPD® System
Programme identification
and declaration traceability
Estimated impact · one crank arm
1.56 kg CO₂e per crank arm
Based on one 201 g catalogue reference crank arm.
Mass-based estimate using the EPD’s conservative factor. Arm weight depends on the selected configuration.
How this estimate is calculated
7.78 kg CO₂e/kg × 0.201 kg = 1.56 kg CO₂e per crank arm.
The displayed estimate converts the EPD’s conservative GWP-total factor to one reference crank arm using its catalogue mass. The selected side, length, interface and finish determine the arm weight.
Catalogue weight note: crank (ISIS 165/Q:8) without bolt.
The EPD declares 1 kg of forged aluminium cranks with the referenced packaging included in the assessment. It reports the highest result for each indicator across its included products; different indicators can therefore represent different products. Primary data refer to 2024.
The declared product is a forged aluminium crank arm. The cradle-to-gate study covers raw material production through manufacturing; the full declaration provides the study boundaries and assessment details.
Published families: Delta, Kapa/Kappa, Sigma, Epsilon, Classic, PSI, Helius, Virage, Kies and Mythos (Mithos in the catalogue). See the declaration’s product list and reference configurations, and contact Miranda to confirm applicability for your specification.
The full picture.
Open the original technical page for dimensioned drawings, mounting options and notes.
