

Mirage
REFERENCE 012
Explore available lengths, finishes and crank geometry. Match the interface and Q-factor to your complete assembly using the technical drawing.
- Material
- Aluminium
- Weight
- 245 g
- Length (mm)
- 150 . 152 . 155 · 160 . 165 . 170
Weight is for the catalogue configuration. See measurement notes below.
Miranda aluminium crank EPDIndependently verified by SGS ICS ItaliaEvery specification.
Considered.
Technical data from the 2026 Miranda catalogue. Measurement conditions and available configurations are shown with the original drawing.
| Material | Aluminium |
|---|---|
| Length (mm) | 150 . 152 . 155 · 160 . 165 . 170 |
| Weight (g) | 245 |
| Finishes | Standard · Polished · Diamant · Double Diamant |
- crank (ISIS 170/Q:16) without bolt
Made to fit.
Choose dimensions as part of a complete assembly. Final compatibility depends on the frame, drivetrain and selected components.
Crank Q-factor geometry
| Crank Q-factor | A | B | C | D |
|---|---|---|---|---|
| Q:0 | 0 mm | 27,1 mm | 10,5 mm | 14,1 mm |
| Q:4 | 4 mm | 27,1 mm | 10,5 mm | 18,1 mm |
| Q:8 | 8,1 mm | 27,1 mm | 10,5 mm | 22,2 mm |
| Q:16 | 16 mm | 27,2 mm | 10,5 mm | 30,2 mm |
Environmental data.
Independently verified.
Explore Miranda’s published Environmental Product Declaration for forged aluminium cranks, independently verified by SGS ICS Italia. The declaration identifies ten product families and their reference configurations.
Explore the full declaration for the covered products, reference configurations and independently verified environmental indicators.
- Third-party verification
- SGS ICS Italia
- Declaration
- EPD-IES-0027768:001
- Study scope
- Cradle-to-gate
- Standard / valid until
- ISO 14025:2006
27 January 2031
About the environmental declaration
The EPD declares 1 kg of forged aluminium cranks with the referenced packaging included in the assessment. It reports the highest result for each indicator across its included products; different indicators can therefore represent different products. Primary data refer to 2024.
The declared product is a forged aluminium crank arm. The cradle-to-gate study covers raw material production through manufacturing; the full declaration provides the study boundaries and assessment details.
Published families: Delta, Kapa/Kappa, Sigma, Epsilon, Classic, PSI, Helius, Virage, Kies and Mythos (Mithos in the catalogue). See the declaration’s product list and reference configurations, and contact Miranda to confirm applicability for your specification.
Explore the declared crank families and reference configurations in Miranda’s published EPD, or contact our team for environmental data for your specification.
The full picture.
Open the original technical page for dimensioned drawings, mounting options and notes.




